- Bearings Catalog
- >
- Roller Bearings
- >
- Cam Follower Roller Bearings, Stud Type - Inch and Metric
- >
- Inch Series
- >
- CF8-1
- Standard finish is black oxide.
- The stud has a screwdriver slot or hexagonal hole for mounting.
- Some sizes are available with crowned outer race tires.
- Some sizes are available with integral seals.
- The load rating is based on a track hardness of HRc40 minimum.
- The stud has an axially drilled hole for lubrication.
Product Details
| Specifications | ||
| Bearing Type | Full Complement | |
| Max Speed (Grease) | 10,000 | rpm |
| Dynamic Load Rating (Cr) | 640 | lbs |
| Static Load Rating (Cor) | 830 | lbs |
| Tire Outer Dia. (Dt) | 0.500 | in |
| Stud Dia. (ds) | 0.190 | in |
| Tire Width (C) | 0.375 | in |
| Tire Washer Width (C1) | 0.031 | in |
| Total Length (B) | 1.032 | in |
| Stud Length (B1) | 0.625 | in |
| Threads (G) | 10-32 UNF | |
| Thread Length (G1) | 0.25 | |
| Weight (g) | 11.00 | grams |
| Material | Stud and Roller head: Hardened carbon steel alloy, Needle rollers - 52100 Chrome steel or equivalent | |
All information in this catalog has been thoroughly checked for accuracy. However, the catalog data should not be relied upon entirely for design and development purposes. AST Bearings assumes no liability for possible errors or omissions. All dimensions and specifications are subject to change without notice. Contact AST Bearings for the most current catalog data as it applies to you and for your application.